米迦勒 发表于 2016-11-30 15:01:14

CSR8670 与 app应用连接 问题

我用的CSR8670 与手机开发的app软件可以pairing success 但是 未连接 谁知道是什么问题啊


in0501 发表于 2016-11-30 15:11:31

版本兼容性问题或A2DP没连接上。

yang1 发表于 2016-11-30 15:12:35

连接就两个:)

yang1 发表于 2016-11-30 15:13:06

SCLA2DP:):)

米迦勒 发表于 2016-11-30 15:24:42

yang1 发表于 2016-11-30 15:13
SCLA2DP

是这样的
我的CSR 可以正常和手机连接
dubug是这样
CL =
HS : ACL Opened
CL =
Sink - Unhandled CL msg
CL =
CL_SM_IO_CAPABILITY_IND
CL =
CL_SM_IO_CAPABILITY_REQ_IND
CL =
CL_SM_AUTHENTICATE_CFM
HS: Pairing Successful
MP Enable Connectable +i
SM:->
MP Disable Discoverable +p
AT: Play Cmd -no config
AT: Play Cmd -no config
CL =
HS : CL_SM_SET_TRUST_LEVEL_CFM status 0
CL =
Sink - Unhandled CL msg
HFP =
HFP_SLC_CONNECT_IND
HFP =
HFP_SERVICE_IND
HFP =
HS: HFP_SIGNAL_IND
HFP =
HS: HFP_ROAM_IND
HFP =
HS: HFP_BATTCHG_IND
HFP =
HFP_SLC_CONNECT_CFM
SM:Remain in Disco Mode
MP Disable Discoverable +p
MP Enable Connectable -i
SM:->
HS : EventSysCheckAudioAmpDrive still busy, reschedule
AT: Play Cmd -no config
AT: Play Cmd -no config
AT: Play Cmd -no config
HS: EventSysSLCConnected
AT: Play Cmd -no config
HS:Device Connected
AT: Play Cmd -no config
CL =
Sink - Unhandled CL msg
CL =
AT: Play Cmd -no config
HS : EventSysA2dpConnected
AT: Play Cmd -no config
CL =
Sink - Unhandled CL msg
CL =
SPP_CONNECT_IND
CL =
Sink - Unhandled CL msg
SPP_SERVER_CONNECT_CFM_T :-Success
Memory Slots: 24
theSink.sppstate2: 224
SPP_MESSAGE_MORE_DATA :
778475838080701111147777732402402402410001073152972114513810420620797
gTheSinkState: 3
SPP_MESSAGE_MORE_DATA :

gTheSinkState: 3
SPP_MESSAGE_MORE_SPACE:
The data which needs send is finished!
HS : EventSysCheckAudioAmpDrive still busy, reschedule
AT: Play Cmd -no config
CL =
Sink - Unhandled CL msg
HS : EventSysCheckAudioAmpDrive turn off amp
AT: Play Cmd -no config
HS: Check Aud Tx
AT: Play Cmd -no config
HS : EventSysStreamEstablish
AT: Play Cmd -no config
HFP =
HFP_SLC_DISCONNECT_IND
Handle Disconnect
MP Go Conn
MP Enable Connectable -i
AT: Play Cmd -no config
HS: EvSLCDisconnect
AT: Play Cmd -no config
CL =
HS : UE unhandled!!
AT: Play Cmd -no config
MP Go Conn
MP Enable Connectable -i
MP Enable Connectable -i
SM:->
SM: Disco 1 RSSI 0
SM: Num Devs 2
HS:Device Disconnected
AT: Play Cmd -no config
AT: Play Cmd -no config
HS : EventSysCheckAudioAmpDrive still busy, reschedule
AT: Play Cmd -no config
AT: Play Cmd -no config
HS : EventSysCheckAudioAmpDrive turn off amp
AT: Play Cmd -no config
然后 与app连 debug如下
CL =
HS : ACL Opened
CL =
Sink - Unhandled CL msg
CL =
CL_SM_IO_CAPABILITY_IND
CL =
CL_SM_IO_CAPABILITY_REQ_IND
CL =
CL_SM_AUTHENTICATE_CFM
CL =
Sink - Unhandled CL msg
HS: Pairing Successful
MP Enable Connectable +i
SM:->
MP Disable Discoverable +p
AT: Play Cmd -no config
AT: Play Cmd -no config
SPP_CONNECT_IND
CL =
HS : CL_SM_SET_TRUST_LEVEL_CFM status 0
CL =
Sink - Unhandled CL msg
SPP_SERVER_CONNECT_CFM_T :-Success
Memory Slots: 24
theSink.sppstate2: 224
HS : EventSysCheckAudioAmpDrive still busy, reschedule
AT: Play Cmd -no config
HS : EventSysCheckAudioAmpDrive turn off amp
AT: Play Cmd -no config

米迦勒 发表于 2016-11-30 15:27:27

yang1 发表于 2016-11-30 15:13
SCLA2DP

请问我的是什么问题啊 能不能说的详细一点啊 谢谢

米迦勒 发表于 2016-11-30 15:29:27

in0501 发表于 2016-11-30 15:11
版本兼容性问题或A2DP没连接上。

请问能不能说的具体点呢因为 app可以与一款手表正常连接 不知道为什么不能与CSR正常连接

yang1 发表于 2016-11-30 15:59:41

看到木有最后一句

yang1 发表于 2016-11-30 16:01:10

音频功放驱动事件开启失败，应该是a2dp连接失败，你从源码中查找一下原因

米迦勒 发表于 2016-11-30 16:08:06

关键是我都没有改过关于这方面的代码啊 ，大神
页: [1] 2 3
查看完整版本: CSR8670 与 app应用连接 问题