CSR8600系列硬件设计向导 翻译系列之一
CSR8600硬件设计向导 CSR8600 HW Design Guidelines.pdf中的一句话，如下：The stack up and PCB material need to be defined to allow controlled impedance track widths to be specified.
本人试译如下，如有不对之处还请大侠指点！
板层设计和PCB材料需要被限定，目的是可以控制线宽，以取得指定的阻抗。
谢谢！
附图：
Core & Prepeg are FR4 materials inside a multilayer PCB.
http://www.4pcb.com/media/-062%204%20layer%206-9-2010.gif
Refer to above picture, the middle FR4 is the core.There are 2 #2116 prepeg FR4.One between L1 and L2.One between L3 and L4.There are several common type of prepegs.When you design a RF board, you need to know:
1. Total thickness of the board.E.g. 1.6mm?1.0mm? or 0.8mm?
2. You need to define the stack up structure.E.g. what core thickness?What prepeg?copper layer thickness?You must discuss this with your PCB supplier.
All RF tracks running on top layer (i.e. L1) are microstrips.You can calculate the impedance with some online tools.
http://www.cepd.com/calculators/img/z.gif
One simple tools is here:
http://www.cepd.com/calculators/microstrip.htm
I have a very powerful CAD which can simulate all type of microstrips, striplines, coplanar strips, ... 其实说的就是天线的阻抗50欧 bluetooth 发表于 2013-10-13 10:54
其实说的就是天线的阻抗50欧
thank you for your help! 好好学习天天向上 LXQ 发表于 2013-10-14 10:15
好好学习天天向上
welcome to here! Stack up means the PCB material configuration.For a typical 4-layer PCB, there are 2 prepeg and 1 core FR4 material.PCB trace impedance depends on the prepeg thickness.So, you much choose a suitable stack up and then do microstrip impedance calculation to ensure you get the correct impedance. chrischan1911qq 发表于 2013-10-17 23:44
Stack up means the PCB material configuration.For a typical 4-layer PCB, there are 2 prepeg and 1...
谢谢大侠指点！
请教：prepeg 是何意？
宝贵资料，保存备用！ 学习了。。。。 本帖最后由 herosyfj 于 2013-10-19 11:34 编辑
whljsh 发表于 2013-10-19 09:46
学习了。。。。
welcome friend to here!
页:
[1]
2