Fedot01 发表于 2019-11-13 19:09:39

How to set pairing PIN to CSR8675

本帖最后由 Fedot01 于 2019-11-13 19:11 编辑

Hello,

I have a CSR8675 and I want to set a PIN for pairing device. I found that I need to change PSKEY_LOCAL_SUPPORTED_FEATURES at PSTool. Default value for it was feff fe8f ffdb 875b. People say I need to change it to ffff fe8f ff9b 8753. But when I do this CSR8675 not even start until I revert changes. Tell me please how can I set PIN code for pairing?

628495173 发表于 2019-11-14 14:18:18

CSR8675需要修改代码，你的方法不适用。

Fedot01 发表于 2019-11-14 15:44:40

52bluetooth 发表于 2019-11-14 14:18
CSR8675需要修改代码，你的方法不适用。

Thanks for your answer. So I need to find a firmware which support PIN for pairing or PIN can be set only with source code?

628495173 发表于 2019-11-14 18:18:21

Fedot01 发表于 2019-11-14 07:44
Thanks for your answer. So I need to find a firmware which support PIN for pairing or PIN can be s ...

输入PIN码要在代码里面打开pin code功能才行。

Fedot01 发表于 2019-11-15 02:21:33

52bluetooth 发表于 2019-11-14 18:18
输入PIN码要在代码里面打开pin code功能才行。

Could you tellhow can I do that?

628495173 发表于 2019-11-15 10:25:25

Fedot01 发表于 2019-11-14 18:21
Could you tellhow can I do that?

有源码吗？ 没有源码改不了

freechen 发表于 2019-11-15 15:43:32

在中国请将中文

Fedot01 发表于 2019-11-15 19:09:17

52bluetooth 发表于 2019-11-15 10:25
有源码吗？ 没有源码改不了

I'm sorry. I have not the source code. Only a CSR8675 and a programmer FT232RL.

628495173 发表于 2019-11-16 10:27:21

Fedot01 发表于 2019-11-15 11:09
I'm sorry. I have not the source code. Only a CSR8675 and a programmer FT232RL.

那么你需求的功能就无法实现了，必须要源码。
页: [1]
查看完整版本: How to set pairing PIN to CSR8675