QCC512x手机电量显示，sink_hfp_data_config_def.h报错。
本帖最后由 EdwardLee 于 2021-5-11 09:52 编辑解决了，WindowsError: 错误是文件已经打开被占用。但我找不到是哪里占用的，直接重启就OK了。
QCC512x 增加电量显示，参考http://www.52bluetooth.com/forum ... 7%C1%BF%CF%D4%CA%BE
但xml一直在报错，真的不知道错在什么地方，求指导！
CSR8675也是同样方式加上。
INFO : Mapping PS key:12
INFO : Packed data Id="AT Cmd Data" - Type:uint into BlockId:Relative Word:0 BitOffset:0 ItemSize:16
INFO : PS key:12 maps BlockId:71 'HFP AT Commands Data'
INFO : Mapping PS key:13
INFO : Packed event Id="At Cmd Event" - Type:enum into BlockId:Relative Word:0 BitOffset:0 ItemSize:16
INFO : Packed at_cmd Id="AT Command Index" - Type:uint into BlockId:Relative Word:1 BitOffset:0 ItemSize:16
INFO : PS key:13 maps BlockId:111 'Event to AT Commands Mapping'
INFO : Mapping PS key:14
INFO : Packed phone_number Id="One Touch Phone Number" - Type:AsciiString into BlockId:129 Word:1 BitOffset:0 ItemSize:20
INFO : PS key:14 maps BlockId:129 'One Touch Dial Phone Number'
INFO : Generating file: D:\projects\QCC\ShanlingUP5\apps\applications\sink\sink_hfp_data_config_def.h
ERROR : Exception:
Traceback (most recent call last):
File "moduledef2configdef.py", line 328, in <module>
File "moduledef2configdef.py", line 259, in run
File "moduledef2configdef.py", line 166, in generateConfigSet
File "moduledataset.py", line 99, in process
File "moduledataset.py", line 192, in __generateConfigDefinitionSourceCode
File "moduledata.py", line 1427, in generateModuleDefinitionSourceCode
File "utilities.py", line 369, in __exit__
WindowsError: : 'D:\\projects\\QCC\\ShanlingUP5\\apps\\applications\\sink\\sink_hfp_data_config_def.h'
没玩过额。 重启一下电脑 ganxiniuhe 发表于 2021-5-11 09:03
重启一下电脑
解决了，重启下就好了。
好莫名其妙的错误，我把增加的AT Cmd Data和At Cmd Event去掉就OK，加上就报错。
页:
[1]