你是想说在充电的时候，通过按键让耳机开机然后正常连接手机使用对吧？
如果是这样，只要在事件配置那里添 ...
Hi 前辈好，前12项按你的建议修改，出来的打印是Attaching to Device @ "tc:usb2tc:108"...
2 windowed masters
Device attach succeeded.
device = qcc512x_qcc302x-lab
chip = qcc512x_qcc302x-r02-v0
----.--- apps1: Processor 1
----.--- apps1: Firmware ID 1635390371
----.--- apps1: IPC Other processor has Trap API v9.3.0
----.--- apps1: PDLSize
----.--- apps1: MAIN Boot took 247083 instructions, 51944 stalls, 619639 clocks
----.--- apps1: CL (CL_INIT_CFM)
----.--- apps1: HFP (HFP_INIT_CFM)
----.--- apps1: FAULT 0x9 0x0 (FAULT_IPC_PIO_NO_EFFECT)
----.--- apps1: MP Disable Discoverable -p
----.--- apps1: INIT: DeviceClass:0x2360344
----.--- apps1: INIT: complete
----.--- apps1: UE (EventUsrChargerConnected)
----.--- apps1: HS: Charger Connected
----.--- apps1: HFP (HFP_SLC_DISCONNECT_IND)
----.--- apps1: HFP (HFP_SLC_DISCONNECT_IND)
----.--- apps1: UE (EventSysUpdateDevicesConnectedStatus)
----.--- apps1: UE (EventSysUpdateDevicesConnectedStatus)
----.--- apps1: CL (CL_SM_SEC_MODE_CONFIG_CFM)
----.--- apps1: CL (CL_DM_WRITE_INQUIRY_MODE_CFM)
----.--- apps1: CL (CL_SDP_REGISTER_CFM)
----.--- apps1: UE (EventUsrAnalogAudioDisconnected)
----.--- apps1: UE (EventSysAnalogueAudioDisconnectTimeout)
----.--- apps1: CL (CL_DM_READ_INQUIRY_TX_CFM)
----.--- apps1: CL (CL_DM_LOCAL_NAME_COMPLETE)
----.--- apps1: UE (EventSysBatteryOk)
----.--- apps1: UE (EventSysChargerGasGauge3)
----.--- apps1: HFP (HFP_AT_CMD_CFM)
----.--- apps1: HFP (HFP_AT_CMD_CFM)
----.--- apps1: HFP (HFP_AT_CMD_CFM)
----.--- apps1: HFP (HFP_AT_CMD_CFM)
----.--- apps1: UE (EventSysLongTimer)
----.--- apps1: UE (EventSysChargeInProgress)
----.--- apps1: LED 0 initialised
----.--- apps1: LED 1 initialised
----.--- apps1: UE (EventSysCheckAudioRouting)
----.--- apps1: UE (EventSysVLongTimer)
----.--- apps1: UE (EventSysVLongTimer)
1408.681 apps1: UE (EventSysChargeComplete)
1408.681 apps1: HS: EventSysChargeComplete
1414.644 apps1: UE (EventSysLongTimer)
1416.143 apps1: UE (EventSysVLongTimer)
1416.147 apps1: UE (EventUsrPowerOn)
1416.147 apps1: HS: Power On
1416.154 apps1: MP Enable Connectable -i
1416.177 apps1: DIS
1416.183 apps1: UE (EventUsrChargerDisconnected)
1416.183 apps1: HS: Charger Disconnected
1416.205 apps1: UE (EventUsrChargerConnected)
1416.205 apps1: HS: Charger Connected
1416.270 apps1: UE (EventSysLEDIndicateState)
1416.761 apps1: UE (EventSysBatteryOk)
1416.764 apps1: UE (EventSysChargerGasGauge3)
1416.764 apps1: UE (EventSysEQOn)
1416.764 apps1: UE (EventSysUpdateDevicesConnectedStatus)
1416.764 apps1: UE (EventSysCancelLedIndication)
1416.764 apps1: HS: Disable LED indication
1416.956 apps1: HFP (HFP_AT_CMD_CFM)
1416.959 apps1: HFP (HFP_AT_CMD_CFM)
1416.959 apps1: HFP (HFP_AT_CMD_CFM)
1416.959 apps1: HFP (HFP_AT_CMD_CFM)
1417.643 apps1: UE (EventSysVLongTimer)
1418.680 apps1: UE (EventSysCheckAudioAmpDrive)
1418.680 apps1: HS : EventSysCheckAudioAmpDrive turn off amp
1418.686 apps1: HS : Audio prompt done
1419.176 apps1: UE (EventSysEnablePowerOff)
1419.179 apps1: HS: EventSysEnablePowerOff
又被关机了，你指的“开机函数没有在充电判断不开机”是干掉powerManagerChargerConnected这个函数吗？ config tool里配置 system--allow aoto power off when charging winterduyudong 发表于 2021-10-28 12:03
config tool里配置 system--allow aoto power off when charging
这个已经试过，充电时开不了机。 ┌.靈魂mi.夨 发表于 2021-10-28 13:29
这个已经试过，充电时开不了机。
user button 里吧VCHG 取消就好了 winterduyudong 发表于 2021-10-29 14:00
user button 里吧VCHG 取消就好了
这个软件我们VCHG一直都是没用到的。。。 subsys7_config2.htf里面把这句注释就可以了，这是充电时强制关机复位的ResetOnChargerAttach = true lulu7320198 发表于 2021-11-13 18:09
subsys7_config2.htf里面把这句注释就可以了，这是充电时强制关机复位的ResetOnChargerAttach = true ...
+1:P:P:P:P:P 朝朝辞暮 发表于 2021-12-15 11:56
+1
为啥3024 默认工程里面，subsys7_config2.htf 文件中没有这句话:$
竟然没有招了，充电关机
页:
1
[2]