justin_zuo 发表于 2015-4-23 11:49:48

有没有人写一个8670的流程啊，比如只加载SINK的程序


有没有人写一个8670的流程啊，比如只加载SINK的程序。到产品能正常工作。



mupro 发表于 2015-4-23 12:05:16

ADKSinkUserGuide.pdf里面有说明
2. Getting Started
2.1. To Flash the Audio Sink Application onto Suitable Hardware
1. Connect the interface board to the development board and attach the SPI interface and USB charger.
2. Attach suitable headphones and microphone to the sockets on the development board.
3. Open the xIDE development environment from the ADK program folder.
4. Select Open Workspace from the Project menu and select the sink application from the apps subdirectory.
5. By default the application is setup to run on CSR8670 or CSR8675 hardware, to change hardware or
audio mode, see section 2.
6. Make sure the Transport is set correctly. Choose Debug > Transport and select the required Debug
Transport.
7. Use PSTool to merge the relevant PS Keys onto the device, for basic operation, for:
 CNS10001v4 development board: Use sink_system_csr8670.psr and
sink_config_10001v4_stereo.psr.
 H13179 with H13374 modules : Use sink_system_csr8675.psr and
sink_config_H13179v2_H13374v2_stereo.psr.

628495173 发表于 2015-4-23 12:59:12


justin_zuo 发表于 2015-4-23 15:08:02

按上面的步骤导入后，发现只要断开SPI连接，蓝牙就会自动关机，是咋回事？

liujinhan 发表于 2016-11-9 18:41:55

用blueflash down 进去再merge psr即可。
页: [1]
查看完整版本: 有没有人写一个8670的流程啊，比如只加载SINK的程序