mib key设置
At application build using the CoreEnable MIB key (set to [ 01 ]) – this will be the default向大佬请教一下,有人知道这个MIB key值是在哪里设置的。有人知道吗?
看看你用的是哪个ADK,找到ADK下的SUBSYSTEM_CONFIG说明,
file:///C:/qtil/ADK_QCC512X_QCC302X_WIN_6.4.2.26/doc/subsystem_config/audio_qcc512x_qcc302x.html
CoreEnable
Number (psid) 0x003a 58
Type octet_string
Default CoreEnable = 1
Allowed Values
Minimum string length 1 octets
Maximum string length 1 octets
List of processor instances to be enabled
This key lists the processor instance numbers other than processor 0 to be activated. By default all supported processors are active. For dual-core, only processor 1 is listed here. skywingfei 发表于 2022-3-9 09:49
看看你用的是哪个ADK,找到ADK下的SUBSYSTEM_CONFIG说明,
file:///C:/qtil/ADK_QCC512X_QCC302X_WIN_6.4.2 ...
这里好像修改不了
Allowed Values
Minimum string length 1 octets
Maximum string length 1 octets
这里只有一个值,而且默认就是一好奇怪
把KEY加到MDE对应的htf文件里, 加到 Cur_Cfg_filesystem里的 subsys0_config2.htf。
网上扎到的, youilove 发表于 2023-7-14 18:54
把KEY加到MDE对应的htf文件里, 加到 Cur_Cfg_filesystem里的 subsys0_config2.htf。
网上扎到的, ...
老哥,这个key到底是什么,我两个项目一个这个文件都一样的,只有会在upgrade的时候识别不到 学习 atom1102 发表于 2023-11-8 14:48
老哥,这个key到底是什么,我两个项目一个这个文件都一样的,只有会在upgrade的时候识别不到 ...
快忘了,好像和flash有关看你用的是什么flash,我的是刷固件不能用工具改地址和蓝牙名称,改了就启动不了,加了key到那个文件里就没可以谁便改了, 围观学习下
页:
[1]