做蓝牙耳机，需要买哪些测试仪器？:请教：做蓝牙耳机，需要买哪些测试仪器、设备？需要购买网络分析仪吗？
谢谢！
频率测试仪，测试功率， 网络分析仪，测试天线。 网络分析仪比较贵。
本帖最后由 herosyfj 于 2013-10-9 23:33 编辑
谢谢大侠指点！
我整理下：
频率测试仪：测试功率；
网络分析仪：测试天线。
网络分析仪比较贵。
我是刚开始做蓝牙，还不怎么了解。现在原理图已经定了，下一步就是准备物料，layout,router,调试...
本帖最后由 herosyfj 于 2013-10-10 15:54 编辑
请教大侠，下图是个啥仪器？是频率测试仪，还是网络分析仪？谢谢！
附图：
蓝牙测试仪－－测试产品是否符合蓝牙协仪－－所有参数
本帖最后由 herosyfj 于 2013-10-11 06:29 编辑
谢谢大侠的指点！
请教：
蓝牙测试仪 和 频率测试仪、网络分析仪有何区别？买了蓝牙测试仪 ，还需要再买频率测试仪和网络分析仪吗？
8852，可以测试蓝牙TX、RX发射功率，频偏，BER和PER等等，以及接收和发送灵敏度等等蓝牙的一些参数
thank you deeply for your help to me!
To measure antenna matching, Network Analyzer is really needed.
Network Analyzer !网络分析仪！
i see!
thank you for your help!
Network analyzer is not an easy equipment to use. You need to have very strong knowledge background of transmission line theory. Very important is you need to know how to calibrate the port(s) before you do actual measurement. Otherwise, measurement data is wrong and useless.
本帖最后由 herosyfj 于 2013-10-18 10:48 编辑
谢谢大侠指点！你的e文好棒！
请问，你对网分熟悉吗？像我们这样的蓝牙耳机研发生产公司，是不是还需要专门的培训？
Yes, we have network analyzer up to 9GHz. We have been using network analyzer for 20 years. I can say few people know the techniques to use network analyzer correctly.
For typical Bluetooth speaker design, most designs use ready made module. It is not a must to have network analyzer in design. 50 ohm antenna port matching should be done on the module already.
For the antenna, if you use chip antenna, just follow the design and layout guidelines of the antenna manufacturer will be fine. If you use printed PIFA antenna on pcb, you better know how to do 3D EM simulation so that you can predict the antenna radiation pattern and gain.
这段英文太正典了！非常感谢！记录备用！
我们在调试天线时，能请贵方帮我们调试吗？
您说的芯片天线(chip antenna)指的是陶瓷天线吗？请给推荐下芯片天线。
曲流型天线属于印制PIFA天线(printed PIFA antenna)吗?
请大侠给推荐下3D EM simulation软件。
再次致谢！
Most chip antennas are ceramic antennas (陶瓷天线). There are many suppliers like Antenova, ACX, Rainsun, Fractus, ... Taiwanese brands are normally cheaper and performance is ok.
PIFA is Printed Inverted-F antenna. The name came from the shape like a F on the PCB.
I'm not sure what do you mean by 曲流型天线. I think it is simple PCB antenna in a shape of |_|ˉ|_|ˉ|_|ˉ. This is not PIFA antenna. PIFA antenna has better performance than it.
For the past 5 years, we have been using CST Microwave Studio for 3D EM simulation. It is quite good. You can even convert the complete PCB layout gerber file to build the 3D structure and add any plastic and metal cabinets to do a more accurate simulation. If you include more structures, it will take longer time to complete the simulation.
https://www.cst.com/Products/CSTMWS
谢谢大侠的指点！
曲流型天线：Meander Line Antennas
I will study "CST Microwave Studio for 3D EM simulation"software.先在网上找个破解版，学习学习。
请教：
目前在蓝牙应用中，我没见到过使用 ceramic antennas的。我手里有一个开发板、两个蓝牙耳机都是用的Meander line antennas。因此，在我司的蓝牙耳机中，我准备用Meander line antennas。
看此贴 受益匪浅呐~！~~~
顶一下
About 7 years ago, we developed a Bluetooth headset and we used ceramic chip antenna. I think why most designs use Meander Line antennas is because it has lower cost.
Classic meander line antenna has good properties such as, small, low profile, simple and cheap.
These nice features make meander line antenna very popular and usable in many aspect of communication systems such as RFID, Bluetooth and WLAN.
Classic meander line antenna has some disadvantages. They have low efficiency, low bandwidth
and can not operate in multi band frequencies.
So, when you do you design with meander line antenna, you should search for more technical papers to understand the theory. You must know how to calculate and do the simulation. Here below is quite a good article for your reference.
看完大侠的回帖，受益非浅！谢谢！
学习了！
附图：
好好学习，天天向上。
谢谢大侠指点!
请问：
BER和PER，指的是什么？
小弟下雨天默默的路过贵宝地。。。
不好意思，我只是打酱油的！
好好学习，天天向上。
^^^ qwert = spammer!!!! Please ban "qwert" he is a bot
做蓝牙需要用到的仪器一般有：
1、安立8852B之类的，可以测试发射功率，频偏，接收灵敏度等等
2、网络分析仪，可以调下射频端的物理条件，比如反射系数，阻抗匹配等等。
3、频谱仪，测试下发射功率，带宽，频偏等等
其他的就。。。。BITI AT4 这个就高端大气了，一套一两百万欧元的蓝牙专业测试系统。。
二手的有一二十万，高端点的30-40万左右，这是几年前的行情，现在不太清楚多少了。
行家
，你应该用过！
我是做蓝牙耳机的工厂，请教下生产线上一般要用到什么仪器测试，目前我们只有几个测试盒
目前我们工厂基本都是用CRY6125,CRY6135,CRY6151来测试
2A9_0594.pdf (339.41 KB) 
未命名.JPG