CSR8670作source端，怎么给别的蓝牙模块打电话呢？

leige1v9

基于ADK2.5.1自带的source源码开发，想跟别的蓝牙模块B通话。现在的认识是，配对连接上后，设置call_setup_outgoing，这样模块B处于电话播出状态，然后连aghfp audio，连上后再把模块B的设置为call active的状态。可是这样做之后没有声音。
哪里做错了吗？还是audio连接的某些参数没设置对？

mupro

以前好几个帖子有问了，没人解答

changkun

C.2 Limitations of Analogue Mode Operation
Using the Source application in Analogue mode has the following restrictions, which do not apply for USB mode.
The HFP profile is not intended for use in an Analogue mode device. The audio associated with the
HFP profile is not routed, so is not audible at the Source application end or the remote end.

<CS-224993-UGP4ADKSourceApplicationUserGuide.pdf> page 55

tzf520

  直接来高难度的         

phf

学习下

terrysmt1984

     3170028232